PAGING ACCESSORIES

2-36 is designed to be used in a wide range of applications where telephone access is required for in-house and/or wide-area paging systems

The 12-36 provides a voice prompt DTMF telephone interface for paging. All paging functions are available when used with Messaging Software, "MsgPro" and 12-62 & 15-15 Transmitters

The 12-36 voice-prompted telephone access system can be interfaced to a wide range of paging message systems via the RS232 serial port. Standard SCII commands are used to allow the unit to be easily incorporated into third party paging networks

SPECIFICATIONS

Signal Input DTMF level ?26dBm to +3dBm (reference 1mW into 600 Ohm load)

Maximum 10dB positive and negative twist wist wist

Signal Output 0 to + 9dBm (voice sample dependant)

Tone duration 40mS tone, 40mS space (minimum)

Available in English, French, Spanish. User may support any other language by uploading their own wave files

Input/Output 600Ohm dc blocked transformer with electronic loop and optically Isolated ring detector (Two wire)

Connection RJ12 (centre conductors) to phone and RJ12 socket for 12-62 transmitter Interface and MsgPro Messaging Software

Power Supply +12 to 18V DC nominally 45mA

The 12-36-100 is a autodialer and telephone interface that can be used autonomously allowing voice prompted relay control. The user can either use the 4 on board inputs to trigger the auto-dialler or connect to 12-32 input module for indefinite input expansion

The user can control two (2) on board relays and interrogate the state od the four (4) on board inputs. All input and output wave fikles can be changed by the user.Programming is via USB port

The 12-06 is a simple POCSAG 512bps message generator integrated into a serial lead suitable for interface with 11-72 & 11-78 transmitters or similar

Serial communications with PC is 9600bps, N, 8, 1. 1200 and 2400 bps are also available. The data rate is fixed on both ports and is not adjustable

The 12-06 will handle up to 900 characters of message. A PET password is not required

No installation required, simply plug the D9 socket of the 12-06 to a serial port on the PC and the second D9 to 11-72 or 11-78 transmitter. The 12-06 is powered from the transmitter

UNIMAX is an Alert and Ring Tone Amplifier for most pagers and mobile phones especially for people who are working in noisy environment

• No physical connection, simply drop in cradle
• Extra loud alert "100 +db"
• 10 selectable alerting tones, 3 alerting duration settings
• Escalating alert
• Visual indication
• Volume control with rotate protection
• 3 x AA alkaline battery or plug pack