Unicom Pty Ltd

TELEMETRY / CONTROL / ALARM MONITORING

PSR3000 SERIAL RECEIVER - POCSAG / FLEX

PSR3000 The PSR3000 is a powerful paging receiver/decoder with a single serial data or TTL output. It incorporates an M16 processor which significant amount of data processing capability.
The PSR3000 provides a relay output and up to 3 digital control outputs or to be interfaced with external Relay Control Board for multiple relay outputs.
  • Text search and replace
  • VHF, UHF, 900MHz
  • Pocsag and Flex
  • Programmable serial or TTL data output
  • 1 Relay or 3 digital outputs
  • External antenna on BNC connector

12-88 RECEIVER - POCSAG

12-88 Receiver The 12-88 is a high sensitivity, ultra low power UHF Paging Receiver that controls a single relay and two open collector outputs.
  • POCSAG
  • UHF
  • 4 Capcodes
  • Send the commands to a PC

TMR1 SERIAL RECEIVER - POCSAG / FLEX

TMR1 The TMR1 Telemetry Messaging Receiver is a one way Paging device with output ports which is used as a low cost device to receive wireless data or control equipment. Each output can be turned ON and OFF with separate message. All 8 ports can be controlled with one message
  • POCSAG or FLEX
  • VHF / UHF
  • 7 Capcode
  • Modular or in robust case
  • Various Antenna output

Some of the applications are;

  • Irrigation
  • Lighting
  • Traffic Signals & Signs
  • Traffic Warning Systems
  • Vending Machines
  • LED Displays
  • Utility Control
  • Vehicle Function Control

PDR3000 PAGING DATA RECEIVER

TMR1 The PDR3000 Paging Data Receiver is a multi-function paging data receiver, off air decoder capable of receiving pager messages and processing them in a variety of ways. It is able to print messages direct to a parallel or serial printer or output the message data via the two serial ports in a number of different formats and protocols. The PDR3000 may also be fitted with up to four relay control outputs internally or may interface with the RCM2000 Relay Control Module for Multiple relay control.
  • POCSAG or FLEX
  • VHF, UHF, 900 MHz
  • Large Cap Codes 72000
  • Serial Data Port
  • Parallel Printer Output
  • Relay Output
  • Text to Voice
  • Off Air Decoder
  • Relay Control
  • LED Sign Control

12-84SE RELAY OUTPUT POCSAG RECEIVER

TMR1

The 12-84SE VHF/UHF Relay Receiver provides the capability of remote activation or deactivation of one or two relays on receipt of commands from any POCSAG paging transmitter. The receiver is supplied with two clean contact relays.

The 12-84SE receives and decodes a numeric or alphanumeric message. Relays can be activated by message or cap code. 12-84SE is an economical solution for basic remote control applications where one or two switched outputs are required. On board LEDs indicate receiver operation as well as the relay status. Each relay can be programmed for latching or momentary operation.

  • Synthesized, programmable
  • 148 - 161 Mhz / 450 - 470 Mhz
  • RS232 Serial output
  • Relay connections
  • 12V operation

12-32 EXPANSION MODULE

TMR1

The 12-84SE VHF/UHF Relay Receiver provides the capability of remote activation or deactivation of one or two relays on receipt of commands from any POCSAG paging transmitter. The receiver is supplied with two clean contact relays.

The 12-84SE receives and decodes a numeric or alphanumeric message. Relays can be activated by message or cap code. 12-84SE is an economical solution for basic remote control applications where one or two switched outputs are required. On board LEDs indicate receiver operation as well as the relay status. Each relay can be programmed for latching or momentary operation.

  • Synthesized, programmable
  • 148 - 161 Mhz / 450 - 470 Mhz
  • RS232 Serial output
  • Relay connections
  • 12V operation

 

SPECIFICATIONS AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE
AS PRODUCTS ARE UNDER CONSTANT ENHANCEMENT